Automatic loading and unloading stacker

Electric stacker is a stacker structure, including wheels, a base supported on the wheels and a power source for driving the wheels. The tail of the stacker base is provided with a lift plate, and the lift plate is provided with an operating table, which can control the telescopic slide rail and the telescopic structure that drives the telescopic slide rail to slide. The telescopic slide rail is connected with a fork, and the other end is provided with a lifting mechanism that drives the fork to lift. The fork is located between the lifting mechanism and the storage rack, and the goods inlet and outlet of the storage rack face the lifting mechanism. When the goods are transferred to the shelves of the warehouse for stacking, the extension direction of the rotating base to the telescopic slide rail through the rotating structure is perpendicular to the distribution direction of the storage rack on the lifting mechanism, and then the telescopic slide rail is driven by the telescopic structure to extend so that the support The board extends out of the base, and then the goods are transferred to the pallet (if the pallet can extend under the goods, the pallet directly extends under the goods, and then the lifting mechanism drives the lifting seat to lift and lower the goods so that the goods are placed on the pallet), Retract the telescopic slide rail to retract the pallet onto the base, then turn the swivel base so that the slide rail faces the storage rack and lift the goods to the desired position, extend the telescopic slide rail and drive the pallet into the storage rack , lower the pallet until the goods are placed on the storage rack, and so on until the storage rack is filled with goods.Then drive the wheels to rotate through the power source, so that the stacker can be designed in an unmanned manner, driving to the warehouse where the goods are stored, and then repeating the above-mentioned opposite actions to transfer the objects on the storage shelf to the shelves in the warehouse superior. In order to match the warehouse racks with the use of stackers, the racks should be designed to support only the two sides of the goods, so that the pallets can extend under the goods. Can be loaded or unloaded automatically.