How to use the hydraulic electric double post car lift:
Operation when lifting the car:
1 Clean up the environment around the car lift;
2 Put the lifting arm of the car lift to the bottom position;
3 Retract the lifting arm to the shortest position;
4. Swing the lifting arm of the 2 post lift to both sides;
5 Drive the car between the two uprights of the car lift;
6 Install the rubber pad on the lifting arm, and move the lifting arm to the supporting position of the car;
7 Press the up button until the rubber pad completely touches the car to confirm whether it is safe;
8 Continue to raise the lift slowly, and after confirming the balance of the car, lift the car to the required height and release the up button;
9 Press down the operating handle to lower the lift to the safety lock position, and then the car can be repaired.
Operation when lowering the car:
1 Clear the obstacles around and under the hydraulic car lift, and let the people around leave;
2 Press the up button to raise the car slightly and pull the safety lock;
3 Press down the handle to lower the car;
4 Swing the support arm to both ends and shorten it to the shortest position;
5. Drive away the car.
