Safety precautions for stacker forklift transportation
1. In the absence of a load pallet, to move the stacker, it is necessary to lower the fork of the stacker to the lowest position. Note that when using a stacker, you need to observe the situation on the site, and don't hurt anyone on the job site. It is strictly forbidden to stand on the forks of the stacker.
2. After using the electric forklift, please do not leave the stacker at the work site, stop at the designated place, and pull out the key.
3. The stacker must be trained in professional skills before it can be used. Pay attention to use the emergency stop switch to protect yourself.
4. When the load is rising and falling, make sure that no one is standing around, and no one is allowed to stand on the fork when the vehicle is moving.
5. Vehicle keys are not allowed to be given to people outside the warehouse
6. When it is necessary to stop the stacker, first release the thumb and reset the rotary switch. At this time, the reverse current is induced by the controller, and the stacker will move for a short distance and then stop smoothly.
7. When the voltmeter sends out a flashing signal, that is, the "battery exhausted" alarm, it should be charged in time.
8. When charging, first close the electric lock of the electric forklift and pull out the key from the electric lock.
