Qingdao Eterlift Machinery Co., Ltd. is one of the leading manufacturers and suppliers of vertical scissor lift table in China, also supports customized service. As we have world-leading production equipment and strong manufacturing capabilities, we warmly welcome you to buy durable vertical scissor lift table made in China here from our factory.
Understanding The Relationship Between Lifting Height and Platform Size for Fixed Scissor Lift Tables
Many buyers and engineers ask for a fixed mathematical ratio between lifting height and platform size when specifying a stationary hydraulic scissor lift table. No official standard enforces a fixed proportional formula.
The lifting height and platform dimension of fixed scissor lifts are not in strict direct proportion. The matching is an empirical sizing check constrained mainly by scissor stages, structural stability and platform stiffness, rather than a simple fixed formula.
Definition of Key Terms
Lifting Height (Stroke): Net vertical travel of the platform, excluding the minimum collapsed height.
Platform Size: Overall deck dimension, expressed as length × width.
Industry Safe Empirical Ranges for SJG Fixed Scissor Lifts
When checking stability, engineers prioritize the shorter side of the platform. We use the ratio: Lifting Height H ÷ Platform Short Side Width W
Single scissor (1-stage scissor) H ≤ 0.65 × platform short side Example: Platform 1600×1200 mm, short side = 1200 mm. The safe maximum stroke is around 780 mm. Beyond this height, the lift will suffer poor stability and noticeable shaking. Single scissor structures are not recommended for taller travel.
Double scissor (2-stage scissor) H ≤ 1.25 × platform short side Example: Platform 2000×1500 mm, short side =1500 mm. Safe maximum stroke is approximately 1875 mm.
Triple scissor (3-stage scissor) H ≤ 1.85 × platform short side For higher lifting travel, multi-layer stacked scissor assemblies are required. Reinforced base frame, anti-tipping limit devices and thicker scissor arms are necessary. For heavier load capacity, this ratio should be reduced further for safety margin.
Recommended Platform Aspect Ratio
The standard length-to-width ratio of the platform deck is 1.2 : 1 ~ 2 : 1. Extra narrow and long platforms should be avoided, as they are hard to control deflection under load.
Why Ratio Adjustment Matters for Load Capacity
The above empirical limits apply to general design. Heavier working loads require conservative ratios.
Light duty (≤500 kg): Can approach the upper ratio limit
Standard load (1–3 ton): Reduce the ratio to 80% of the limit
Heavy duty (≥5 ton): Further lower the ratio, with wider base and thicker platform plate to keep platform deflection within acceptable limits
Partial load / overhang cargo: Greatly reduce the height-to-width ratio to eliminate overturning risk
Compliance Note for CE / EN 1570
EN 1570 safety standard for lifting tables does not specify a fixed height-platform ratio. However, stability calculation including overturning moment and support polygon check is mandatory for CE certification. Tall stroke with narrow platform must be fitted with dedicated anti-tipping mechanical stops.
Common Misconceptions
❌ Myth: Larger platform always supports higher lifting height Fact: A bigger platform improves stability, but the maximum stroke is determined by scissor arm length and scissor stages. A large single-scissor table will still vibrate and deflect severely at excessive height.
❌ Myth: One universal formula fits all scissor lift designs Fact: The final usable height is affected by manufacturer structure, cylinder layout and scissor arm section size. Always run a stability and stiffness check before confirmation.
Final Tips for Custom Fixed Scissor Lift Specification
When you send an inquiry for custom stationary scissor lift, provide these parameters: required lifting stroke, platform length & width, rated load, pit condition and whether partial / offset loading will happen. Our technical team will verify the scissor stage configuration and structural safety for your working condition.
Hot Tags: vertical scissor lift table, China, manufacturers, suppliers, factory, customized, buy, cheap, for sale, made in China, 1000kg Scissor Lift Table For Warehouse, Heavy Duty Scissor Lift, Hydraulic Lift, Hydraulic Stationary Scissor Lifter, Vertical Lifts For Raised Platforms, Workshop Hydraulic Lift Platform
