2 Post Gantry Lift For Car Repair

Precautions for the use of two post car lift:
The car is correctly parked in place, and the lifting arm of the 2 post car lift is correctly supported.
Lift the vehicle to 20cm above the ground, stop lifting and check whether the fulcrums are correct.
Make sure that the protective measures are in place before working under the car.
During the descent process, no people and objects are allowed under and near the lifting arm of the car lift.
Do not exceed the maximum load of the 2 post lift.
Do not use the car lift if the parts are missing or worn.
When the lift rises or falls, stay away from the car lift.
Do not use the lift when there are people or objects under the lift.
When entering the work site, check whether the locking device is locked and leave the site.
Maintenance procedures:
Check whether there is any abnormal noise when lifting.
Check for excessive wear and tear on the cable.
Check all movable parts and check for excessive wear.
Check whether the screws at the connection are loose or missing.
Make sure that all parts are working properly before operation.
Knuckles of moving parts are lubricated with grease.