1. The platform truck must be equipped with professional drivers and operators, who have undergone special training, passed the examination, and are certified to work; according to the actual situation of the work, the above-mentioned personnel can concurrently serve each other, but the concurrent personnel must have the concurrent work Employment certificate, approved by the supervisor, and assume corresponding responsibilities. After the construction is completed, the platform truck needs to be moved on the site, and the platform truck should be operated by a professional driver.
2. The driver of the platform truck must follow the mechanical maintenance regulations and perform various inspections and maintenance before starting the platform truck. Before work, check the working range of the platform truck to remove obstacles that prevent the platform truck from rotating and walking.
3. Outriggers are an important preparatory work for the operation of the platform truck. Flat ground should be selected. If the foundation is soft or undulating, the work must be carried out after adding a wooden cushion to confirm that it is correct.
4. Generally speaking, the platform truck should raise the lower arm first, then the middle arm, and finally the upper arm. During the turning operation of the platform truck, the lower arm must be raised to a certain height before turning. The turning process should be slow. Pay attention to whether the distance between the arms and the platform and the equipment meets the safety requirements.
5. Workers on the platform truck should wear seat belts. When working in a live area, the vehicle body should be grounded according to regulations. The platform truck climbing operation should be directed by the person in charge of the work. The person in charge should follow the GB5082 signal and the platform truck operator Make contact. The signal sent must be clear and accurate.
6. Before the operation of the platform truck, the person in charge of the work should make technical and safety briefings to the platform truck operators and all personnel participating in the work. The content should include: job content and requirements; safety precautions and dangerous points; personnel division of labor and scope of responsibility ; Safety precautions and dangerous points; personnel division and scope of responsibility; in addition to inspecting the vehicle condition and the work of the staff, the person responsible for the job is also responsible for checking whether the terrain environment, take-off and landing meet the requirements of safety technical measures or formulated in advance If there are discrepancies in the work plan, corresponding measures should be worked out before work can begin.
