Safety Instructions For Lift Platforms

Safety instructions: Non-professionals are not allowed to disassemble and install electrical appliances at will to prevent electric shock or misconnection. When the working platform of the lifting platform is inspected and repaired, the lifting platform must be hung and supported to prevent the lifting platform from falling suddenly and causing casualties. Do not arbitrarily Adjust the overflow valve. Every component in the hydraulic system works under the specified pressure. After arbitrarily adjusting the overflow valve, it may cause the hydraulic system to operate abnormally. There will be unnecessary damage to people, machines, and objects. Between any part of the hydraulic system, the pressure must be relieved first to prevent the pressure oil from spraying out and the workbench suddenly sliding down. Whether the rollers, intermediate shafts and bearings, cylinder pins and bearings, boom hinge shafts and bearings are worn. All parts are filled with some lubricating oil to prolong the service life of the bearings. The oil quality and oil level of the hydraulic oil. The whole process of the lifting platform When raised, in this position, the hydraulic surface should be 40-50 mm higher than the bottom of the box. The hydraulic oil is darkened, sticky, or has foreign objects such as grit. If found, it should be replaced in time (32# hydraulic oil).