Vertical Wheelchair Lift Elevator

Wheelchair elevator is a vertical lift powered by a motor, equipped with box-shaped pods, used for multi-storey buildings to take people or carry goods, and there are also stepped types. Wheelchair lift equipment serving a specified floor. A vertical lift elevator has a car running between at least two rows of rigid guide rails that are vertical or with an inclination angle of less than 15°. Hydraulic wheelchair lifts began to appear in the mid-19th century and are still in low-rise buildings. In 1852, E.G. Otis of the United States developed a safety elevator for wire rope lifting. In the 1980s, the driving device was further improved, such as the motor driven by the worm drive to drive the winding drum, and the use of counterweights. At the end of the 19th century , The friction wheel drive is adopted, which greatly increases the lifting height of the home elevator. With the improvement of modern people's living standards, in villas or families in small high-rise buildings, in order to facilitate the elderly and people with inconvenient mobility, when family members are older, it is very inconvenient to go up and downstairs, so elevators are used instead of stairs, but the existing The car elevator is not only expensive, but also has a complex structure, and is not suitable for home use due to its large size. The elevator designed by our company can effectively reduce the volume of the device and make it more suitable for home use through the design of reducing the volume of the car. By installing the limit rod, it will not shake during the movement process, which improves the movement of the device. The stability of the elevator ensures the safety of users. At the same time, the shock-absorbing seat installed can buffer the impact force generated by the elevator when the elevator falls, which can reduce the vibration of the car when it falls to the ground and improve the comfort of the user. The safety of the elevator is improved. By installing the anti-skid frame, the electric push rod can be in a normally closed state, which can prevent the accident of the device and cause the car to fall, and further improve the safety of the device. The utility model can effectively avoid and prevent accidental personnel or car falling accidents, the overall structure is simple, the cost is low, the construction and installation are convenient, and it is suitable for families.