The lifting movement of the scissor lift table adopts hydraulic transmission, and the standard wire-controlled handle can be remotely or wirelessly controlled, and a foot switch can also be installed. The lifting movement of the scissor lift table is transformed from the telescopic movement of the hydraulic cylinder into the take-off and landing of the platform. The working load range is 0-1500Kg, the load is stable, there is no impact load during the working process, the running speed is low, and the hydraulic execution.The component has four groups of hydraulic cylinders to achieve synchronous movement, which requires stable operation, reasonable structure and excellent safety. It is used in various occasions and requires general working accuracy. The stationary scissor lift platform is a small equipment with a small footprint, suitable for outdoor use, and has a simple overall structure and layout.
Design of the base for fixing the scissors
The base of the lifting platform supports the entire weight of the platform in the whole mechanism and transmits it to the foundation. Its design focus is to meet the strength requirements to ensure that there will not be too much deformation during the lifting and lowering of the lift. The size of the lift base should be larger than that of the upper platform. The lifting platform with a load of 1000kg adopts a base length of 1500mm*1000mm. The bottom is 40mm*40mm and the thickness is 4mm. The square hollow steel pipe is welded.
