Wire rope for lifting platform

The rope ends of the steel wire ropes at all parts should be connected in a reliable way, such as pouring weaving, forging and using wedge-shaped solid parts. The distance between the rope clamps is not less than 6 times the diameter of the wire rope, and the length between the rope head and the last rope clamp is not less than 140mm, and must be tied with thin steel wire. The pulley of the rope clamp is placed on the side of the wire rope when the wire is working, and the U-shaped bolt is used At the end of the wire rope, the rope clamps shall not be arranged in a staggered manner. The rope clamp shall be fixed before the steel rope is stressed, and then tightened after the force is applied. However, many construction sites have a weak sense of safety. When using rope clamps for fixing, the number of rope clamps, the distance between the ropes, the length of the end, and the length of the end are arbitrary. They are not according to the standard, resulting in a discount of the joints with only 80%-85% fixing strength. Leave a safety hazard.