The mobile dock ramp rotates on the lower end of the bridge body, and the support wheel is disposed on the support, and the support wheel is connected to the bridge through the lifting hydrant cylinder. The bridge includes a ramp segment and a horizontal section; the free end of the ramp segment is provided with a tail plate, and the first rotational shaft is connected to the ramp segment, and the first rotational axis is active in the horizontal direction; the free end of the horizontal segment is provided The tongue is connected to the horizontal segment, and the second rotational axis and the horizontal segment are active in the horizontal direction. The boarding bridge is adjusted by adjusting the width of the tail plate and the tongue to achieve the purpose of convenient to the parking.
In addition to ordinary mobile boarding bridges, our company can customize mobile boarding bridges, the bridge between the boarding bridge is a wide bridge, which can meet the needs of the forklift, etc. The solution is: mounting the bridge surface on the moving wheel below the bridge, the bridge surface is a wide bridge surface, and the width of the bridge and the unloading end connection side is greater than the width of the ground connection side.
The moving wheel of the moving board bridge and the lower moving wheel is larger than the width of the connection side of the tongue panel and the loading and unloading end. The flat bridge is connected to the unloading end by flip the tongue, and the oblique bridge is connected to the ground. A transition bridge plane is provided between the flat bridge and the oblique bridge. Active fence is provided on the bridge. This allows for a larger cargo in the forklift, the width of the flat bridge is not enough, and the movable guardrail on the flat bridge is removed, and the two or more the same boarding bridge is freely combined, and the width of the flat bridge surface can be increased. And the length, to facilitate the purpose of facilitating the loading and unloading of large goods. The bridge is also connected to the hand legs.
The mobile phone boarding bridge has an inequal wide bridge. When used, connect the wider bridge plane side to the loading and unloading end, so that when the bridge is running to the train, the car is installed, at any time According to the work needs to be flexible, the operating efficiency is improved; the active protection bar can be disassembled according to the operation, after removing the active protection column, the two or more boarding bridges can be combined to adapt to the needs of special homework; The boarding bridge has the advantages of simple structure, low cost, good use, and high work efficiency.
Hot Tags: 10 ton loading capacity dock ramp, China, manufacturers, suppliers, factory, customized, buy, cheap, for sale, made in China
