An Industrial Scissor Lift Table designed to lift a car (essentially functioning like an automotive scissor lift) must meet higher technical requirements than standard material-handling lifts, because vehicles are heavy, unevenly loaded, and require strict safety standards. Here are the key technical requirements:
1.Load Capacity
Rated load:Typically 3–5 tons (3000–5000 kg) for passenger vehicles.
For heavier vehicles (SUVs, vans, trucks), capacity may reach 6–8 tons.
Safety factor:Structure and hydraulic system should be designed with a ≥1.25–1.5 safety factor over rated capacity.
2.Platform Size
Length:4–6 meters (to support most car wheelbases).
Width:2–2.5 meters (enough for car track width + operator safety).
Optional wheel runways instead of a full platform to reduce weight.
3.Lifting Height
Range:1.6–2.0 meters (for underbody repair and inspection).
For parking lifts, \~1.8 m is typical.
For pit-mounted lifts, lower height can be smaller (300–400 mm retracted).
4.Hydraulic System
Double hydraulic cylinders for balanced lifting.
Equipped with flow control valves,pressure relief valves, and burst protection valves.
Pump motor typically 3–7.5 kW, depending on load.
5.Structural Design
High-strength steel scissor arms(Q345 or equivalent).
Cross-reinforced base frame to resist torsion from uneven vehicle loading.
Welding quality must comply with ISO/EN welding standards for load-bearing structures.
6.Safety Features
Mechanical safety locks at multiple heights.
Anti-fall valves (hydraulic safety valve to prevent sudden drop).
Limit switches for max/min height control.
Overload protection system.
Emergency stop button.
Platform anti-slip surface or rubber pads to stabilize wheels.
7.Power Supply
Three-phase AC (380V/50Hz or 460V/60Hz) for industrial settings.
Control system: low-voltage 24V control circuit for operator safety.
8.Installation Requirements
Pit installation flush with the ground, or surface-mounted with ramps.
Anchoring system: chemical or expansion bolts fixed in reinforced concrete foundation.
Foundation thickness: typically ≥ 300 mm reinforced concrete for 3–5T capacity.
9.Standards & Compliance
CE (EN 1493: Vehicle lifts), ANSI/ALI ALCTV (North America), or equivalent local standards.
Must meet industrial machinery safety directives and hydraulic safety standards.
An industrial scissor lift table for cars must handle 3–8 tons, have a large reinforced platform, a robust hydraulic system with safety redundancies, and be installed on a proper concrete foundation. Compliance with vehicle lift safety standards is critical for safe operation.
Hot Tags: industrial stationary scissor lift table, China, manufacturers, suppliers, factory, customized, buy, cheap, for sale, made in China
