Precautions for using stacker trucks in summer
1. Before entering the heatstroke prevention period, prepare in advance and release the winter lubricating grease from the stacker truck engine, drive axle, transmission, steering gear, etc., and add summer lubricating grease as required after cleaning.
2. Clean the water channel of the pallet stacker, remove the scale of the cooling system, and dredge the heat sink of the radiator. Always check the tightness of the fan drive belt.
3. Properly adjust the stacker charging regulator to reduce the charging current of the generator.
4. Pay attention to prevent the engine from overheating during operation, and always pay attention to the indication reading of the coolant temperature gauge. If the coolant temperature is too high, take cooling measures. To maintain the amount of coolant, pay attention to prevent the coolant from boiling and cause burns when adding.
5. Always check the temperature and air pressure of the stacker's tires. If necessary, stop in a cool place and wait for the tire temperature to decrease before continuing to work. Venting or pouring cold water should not be used to reduce the pressure and temperature, so as not to reduce the service life of the tires.
6. The brake performance of the stacker should be checked frequently to prevent the brake failure caused by the aging, expansion and deformation of the brake master cylinder or the cylinder cup and the vaporization of the brake fluid.
7. Adjust the electrolyte density of the battery in the pallet truck, and dredge the vent on the battery cover, keep the electrolyte 10-15mm higher than the separator, and add distilled water as appropriate.
8. Make sure to get enough sleep and stay energetic before work. If you feel tired, drowsy, or unresponsive during work, you should stop and rest immediately, or wipe your face with cold water to cheer you up to ensure safe driving and work.
Hot Tags: electric pallet truck, China, manufacturers, suppliers, factory, customized, buy, cheap, for sale, made in China
