





The guide rail of the electric stacker is made of hot-rolled I-beam with a height of 220mm, which matches the guide rail on the upper part of the stacker.
The column of the stacker is a box-type rectangular section structure welded by angle steel and steel plate. This structure has the characteristics of torsion resistance, high bending rigidity and good wear resistance. The column is manufactured in sections, each section is 2 meters. During installation, it is connected by the flange at the head of each section, and then connected by high-strength bolts. The column is welded with the lower beam and the upper beam.
The column angle steel of the electric forklift adopts No. 6.3 hot-rolled equilateral angle steel, the side width is 63mm, the side thickness is 10mm, and the inner arc radius is 7mm. The column steel plate is made of hot-rolled steel plate with a nominal thickness of 25mm, the flange plate is also made of hot-rolled steel plate with a nominal thickness of 25mm, and the bolts are made of M30 high-strength bolts.
The lower beam of the stacker forklift is welded by four steel plates, and the steel plates are hot-rolled steel plates with a nominal thickness of 50mm. The upper beam is also welded by four steel plates, and the steel plates are hot-rolled steel plates with a nominal thickness of 20mm. The vertical plate of the cargo platform is a hot-rolled steel plate with a nominal thickness of 20mm.




Hot Tags: semi electric stacker forklift 3 meter, China, manufacturers, suppliers, factory, customized, buy, cheap, for sale, made in China

















