There are many types of aluminum alloy lift tables, and single mast lift platforms are one of them. Single mast aerial work platforms can be widely used in buildings such as star hotels and large supermarkets. It has the advantages of balanced lifting, convenient operation, low energy consumption and no pollution. And single mast platform can work without damaging the ground, work on the wall and work out.
The single mast aluminum alloy electric lift is equipped with a gantry cross frame attachment, which is very suitable for the maintenance work of theaters, halls, churches, etc. The gantry cross frame is easy to assemble, labor-saving, and flexible to move. It can span a fixed seat with a height of 1.1m It can work stably on steps. It is made of high-strength rectangular steel pipe with good rigidity and stability. Equipped with universal casters, it is mobile and flexible. The span of the two ends can be adjusted, which can be applied to the requirements of crossing different obstacles. The two ends of the frame are vertically adjustable, and can be used for working on a slope or step with a certain slope.
Safety instructions: Non-professionals are not allowed to disassemble and install electrical appliances at will to prevent electric shock or misconnection. When the working platform of the lifting platform is inspected and repaired, the lifting platform must be hung and supported to prevent the lifting platform from falling suddenly and causing casualties. Do not arbitrarily Adjust the overflow valve. Every component in the hydraulic system works under the specified pressure. After arbitrarily adjusting the overflow valve, it may cause the hydraulic system to operate abnormally. There will be unnecessary damage to people, machines, and objects. Between any part of the hydraulic system, the pressure must be relieved first to prevent the pressure oil from spraying out and the workbench suddenly sliding down. Whether the rollers, intermediate shafts and bearings, cylinder pins and bearings, boom hinge shafts and bearings are worn. All parts are filled with some lubricating oil to prolong the service life of the bearings. The oil quality and oil level of the hydraulic oil. The whole process of the lifting platform When raised, in this position, the hydraulic surface should be 40-50 mm higher than the bottom of the box. The hydraulic oil is darkened, sticky, or has foreign objects such as grit. If found, it should be replaced in time (32# hydraulic oil).
Hot Tags: small aluminum alloy lifting platform, China, manufacturers, suppliers, factory, customized, buy, cheap, for sale, made in China
