Guide Rail Type Lift Freight Elevator

Guide rail type lift freight elevator product introduction

Guide rail type lift is a kind of non-scissor lift platform. Due to the minimum height of 150-300mm, it is suitable for places where the depth of the pit cannot be excavated or the depth of the excavation pit is limited. At the same time, the equipment does not need upper lifting points. It is suitable for the transportation of goods between floors of high-rise industrial plants, restaurants, restaurants, supermarkets, etc. from two to five floors or below 20 meters.

2. Product form and use

form:

Guide rail type lift products are divided into single rail, double rail and four-post type and other forms;

The single-rail type is suitable for places with small load capacity and small space constraints. It is named after the equipment has guide rails on one side. The double-rail type has guide rails on both sides of the table, which is suitable for places with relatively large space and relatively large load capacity. The four-post type is a table top There is a one-time formed guide rail column on the four corners;

use:

The rail-type lifting freight elevator is suitable for relatively small spaces. The biggest advantage of this equipment is that it can be tailored to a high-efficiency delivery platform. The hydraulic system of the product is equipped with anti-fall, and the upper and lower doors are interactively chained. Each floor and lifting platform can be set with operation buttons. Realize multi-point control. The product has a solid structure, large carrying capacity, stable lifting, simple and convenient installation and maintenance, and is an economical and practical ideal cargo conveying equipment to replace elevators between low floors. According to the installation environment and use requirements of the lifting platform, different optional configurations can be selected to achieve better use results.

2. The installation method and applicable place of the applicable functions of the guide rail type elevator

Product function and installation method:

The rail-type lift can be designed to carry a maximum load of 30 tons, realize multi-point control, interactive interlocking of upper and lower floors, and achieve safe use; high lifting height, using side-mounted oil cylinders or double-measuring oil cylinders, stable operation, no noise, convenient maintenance, Long service life; functions such as manual lowering and emergency stop button are convenient, fast and practical; the depth of the pit is generally 15cm-30cm, and the height of the top floor is not limited, which can be customized according to the site environment; It is convenient and space-saving to disassemble; it is especially suitable for 2-5-story steel structure workshops and brick-concrete structure workshops, both inside and outside; the pump station adopts a well-known joint venture pump station, if the speed requirement is too high, an imported custom pump station is used. To meet the ideal delivery requirements, the seals use imported parts to solve the problem of unstable oil pressure and oil leakage of parts.

Rail-type lifts are designed and produced according to the needs of customers and the actual environment of the site, and are customized for production according to the size and configuration of the countertops required by customers. Rail-type elevators are mainly used in chemical enterprises, warehouses, high temperature, high pressure, power plants and other enterprises and explosion-proof enterprises such as nuclear industry bases.

Hot Tags: guide rail type lift freight elevator, China, manufacturers, suppliers, factory, customized, buy, cheap, for sale, made in China