Hydraulic equipment such as goods freight lift and electric reach stackers require hydraulic pipes to connect the hydraulic pump station and hydraulic cylinders. The hydraulic pipe joints need to be installed as required, otherwise oil leakage or even damage is likely to occur.
installation method:
1. When the hose is moving or stationary, it should not be bent excessively, nor should it be bent at the root, but should be bent at least 1.5 times its diameter;
2. When the hose is moved to an extreme position, it should not be pulled too tightly, it should be loose;
3. Try to avoid torsional deformation of the hose;
4. Keep the hose as far away as possible from the heat radiating components, and it is necessary to install a heat shield;
5. Avoid external damage to the hose, such as long-term friction on the surface of the same component during use;
6. If the hose's own weight causes excessive deformation, there should be support parts.
