1. Driving the stacker
Before driving the stacker, check the working conditions of the brakes and the pump station, and ensure that the battery is fully charged. Hold the handle of the stacker forklift with both hands, and force the vehicle to slowly drive towards the working cargo. If you want to stop, you can use the handbrake to stop the stacker.
2. Unloading with a stacker
1) With the fork of the electric stacker at a low position, keep it perpendicular to the rack, approach the rack carefully and then insert the pallet chassis
2) Back the stacker to let the forks move out of the pallet
3) Raise the fork to the required height, slowly move to the pallet to be unloaded, and at the same time ensure that the fork can easily enter the pallet and the goods are in the safe position of the fork
4) Raise the forks until the pallet is lifted from the rack
5) Slowly step back in the channel
6) Slowly lower the cargo while ensuring that the fork does not touch the obstacle during the lowering process Note: During the lifting of the cargo, the steering and braking operations must be slow and careful.
3. Stacking
1) Keep the goods low on the forks of the stacker and approach the shelves carefully
2) Lift the goods to the top of the shelf plane
3) Move forward slowly, stop when the goods are above the shelves, put down the pallet at this point and pay attention that the forks do not exert force on the shelves under the goods to ensure that the goods are in a safe position
4) Back slowly and make sure the pallet is in a free and firm position
5) Lower the fork to a position where the stacker can travel
4. Safety facilities
1) Main switch: power main switch
2) Brake: Reliable parking brake
3) Restrictor valve: control the descending speed
4) Pressure limiting valve: control the load
5) Protective frame: protect the driver
