The working process of the aluminum alloy lifter: start the motor of the mobile lifting platform, the motor drives the worm to rotate, and the worm rotates to drive the worm wheel to rotate, which in turn drives the rotation of the shaft. The rotating shaft of the vertical lifting platform can adjust the lifting and lowering of the lifting rope. When the rotating shaft rotates to drive the lift rope to rise, the lift rope drives the lowermost pedal to rise, and the lowermost pedal will abut with the adjacent pedal above it during the rising process, and push the adjacent pedal to rise. Since the uppermost pedal of the aluminum alloy lifting platform is fixed on the side of the guardrail, the uppermost pedal will not follow the lifting rope to rise. When the adjacent lower pedal is in contact with the uppermost pedal, the uppermost pedal will prevent the lower pedal from continuing to move upward. so that the pedal will not follow the lifting rope around the shaft.
The aluminum alloy lift includes a chassis, a lifting body, a hydraulic power unit, a work surface, an electrical control box, and a tilting support mechanism for controlling the tilting of the lifting body at a certain angle. There are multiple legs on both sides of the chassis and multiple The mobile wheel, single-column vertical aluminum alloy lifting platform includes more than one mast group and a support frame arranged on the periphery of the mast, each mast group includes an end mast, an upper mast, a plurality of middle masts and a hydraulic cylinder , each mast is set from top to bottom and the upper mast can slide up and down along the lower mast, the upper end of each middle mast is installed with a drive sprocket and a sprocket frame, and the drive sprocket is fixed on the sprocket frame One end of the transmission chain is matched with the sprocket, and the other end is set on the next mast. The hydraulic cylinder is installed on the chassis. The head of the hydraulic cylinder is hinged with the bottom pair of sprocket frames. The tilting support mechanism includes a power cylinder and a power cylinder. The cylinder body is inclined on the base, the top of the cylinder rod is connected with the support frame, and guardrails are arranged around the working table.In order to increase the height and maximum load of the aluminum alloy elevator, the lifting body can adopt a 4-mast structure, and can also be set to a single-mast or double-mast structure according to the load.
Single-column aluminum alloy lifting platform: This series of products are indoor type, widely used in high-altitude operations in halls and workshops of star-rated hotels, large supermarkets and other industries. In addition, it consumes less power, has no pollution, and does not hurt the ground when working. The single-column aluminum alloy electric lift is equipped with a gantry straddle attachment, which is very suitable for the maintenance work of theaters, synagogues, churches, etc. The gantry cross frame is easy to assemble, labor-saving in operation, flexible in movement, can cross obstacles such as fixed seats with a height of 1.1m, and can work stably on steps. Made of high-strength rectangular steel pipe, with good rigidity and stability. Equipped with universal casters, flexible and flexible. The span of the two ends is adjustable, which can be applied to the requirements of crossing different obstacles. Both ends of the frame are vertically adjustable, which can be used for operations on slopes or steps with a certain slope.
Hot Tags: 10 meter vertical aluminum lift, China, manufacturers, suppliers, factory, customized, buy, cheap, for sale, made in China
